4 (100mm) dia PLASTIC DUCTING & FITTINGS. First you must select the item and quantity you want. On the next screen you select. Instead of'Proceed to Checkout.Stainless Steel Worm Drive Clips/Jubilee Clips. 4/100mm Dia Worm Drive Clips. Worm Drive Jubilee Clips have been specifically designed for fixing flexible ducting to solid ducting, extractor fan spigots, duct fittings and air terminal devices. 9mm continuously threaded stainless steel band. The unique one-piece locking mechanism with tilting head provides very fast clamping by hand - only final tightening by screw or hex. Head driver is necessary to complete a perfectly airtight joint. 60mm minimum diameter to 135mm. Also available in other sizes (see my other listings). Plastic Ventilation Ducting Clips are used for fitting plastic solid ducting to a wall or ceiling. They are robust, versatile and easy to fit. Ventilation ducting brackets are manufactured from flame retardant polymer. Plastic Duct Clips are lightweight with simple to fit. 4/100mm Dia Fan Anti Vibration Clamp. Fast Clamps are perfect for connecting fans, carbon filters, silencer and solid ducting. The metal band has a foam lining so reduces fan vibration.
Pull out eyelets for easy hanging. The best choice for connecting fans to carbon filters, silencers or solid ducting. Plastic Ducting Male Coupler is designed to join solid plastic ducting, un-insulated flexible ducting or insulated flexible ducting.Use either worm drive clips, aluminium or classic tape to ensure an air tight fit. Manufactured from flame retardant polymer. Lightweight with simple to fit connections. 4/100mm Dia Back Draught Shutter. Plastic Ducting Back Draught Shutters are designed to provide anti back draught, and fit in between Solid Plastic Ducting, Flexible Ducting.
Use either Worm Drive Clips, Aluminium or Classic Tape to ensure an air tight fit. 4/100mm Dia T Ducting Piece.Plastic Ducting T Pieces are designed to split Solid Plastic Ducting, FX un-insulated flexible ducting or FI insulated flexible ducting. Plastic ducting tee's are manufactured from flame retardant polymer.
4/100mm Dia Plastic Y Ducting Piece. Ducting Splitters are designed to split Solid Plastic Ducting, FX or FI Flexible Ducting. Use either QRC Worm Drive Clips, ADT Aluminium or CDT Classic Tape to ensure an air tight fit. Plastic ducting reducers are manufactured from flame retardant polymer.4/100mm Dia Flexible Aluminium Ducting. Flexible ventilation ducting is very flexible, hard-wearing, multi-ply aluminium foil.
30 to 140 Deg C operating temperature range. Available in 5m & 10m lengths. Manufactured to EU standard: EN13180.Fire resistant to BS 476. This is an important Building Regulation requirement as it reduces the risk of fire spreading through the duct to different rooms. 4/100mm Dia Acoustic Flexible Ducting. Insulated ventilation ducting is very flexible, hard-wearing, multi-ply aluminium foil, puncture resistant inner core. Clear vapour seal layer to protect acoustic insulation from moisture and condensation.
25mm high density fiberglass insulation. Acoustic ducting is very flexible making it ideal for retrofit heat recovery installations. Tough, scuff resistant, aluminium outer blanket. Our unique Combi Ducting is designed specifically for Hydroponic & Indoor Grow Room Set ups. Durable light retaining black outer layer.Will not set on fire under extreme temperatures i. 4/100mm Dia 45 Degree Plastic Bend. Plastic Bends are robust, versatile and easy to fit to Solid Plastic Ducting, or Flexible Ducting, giving you the ability to make a tight radius, 45 degree bend. 4/100mm Dia 90 Degree Plastic Bend. Plastic Ducting Bends are robust, versatile and easy to fit to Solid Plastic Ducting, Flexible Ducting, giving you the ability to make a tight radius, 90 degree bend. Plastic ducting bends are manufactured from flame retardant polymer. 4/100mm Dia Plastic Ducting Reducer. Plastic Ducting Reducers are robust, versatile and easy to fit to solid plastic ducting, FI Insulated or FX un-insulated flexible ducting.
The large end of the reducer (female) is designed to fit over PD solid plastic ducting, fan spigots and duct fittings with the smaller end of the reducer (male) designed to fit inside PD solid plastic ducting and FX & FI flexible ducting. If fitting the small end of the reducer to fan spigots or duct fittings, you will need a small piece of duct to enable a clean fit. Plastic Ducting Reducers are robust, versatile and easy to fit to PD solid plastic ducting, FI Insulated or FX un-insulated flexible ducting. Plastic Wall Plate with Spigots. 4/100mm Dia Plastic Wall Plate with Spigots.
Ventilation Ducting Wall Plates with Spigots are designed to fit into a wall, ceiling or panel to allow ducting to be connected either side. The plates are robust, versatile and easy to fit to PD Solid Plastic Ducting, FX or FI Flexible Ducting. Ventilation ducting wall plates are manufactured from flame retardant polymer.The adhesive is aggressive and pressure sensitive, leaving an airtight non stretch seal. 45mm wide x 45m per roll.
4/100mm Dia Plastic Condensation Trap. Condensation Trap is designed to be fitted in-line to any heat recovery system to help reduce or eliminate condensation in bathrooms, shower rooms, kitchens, and utility rooms or anywhere that has high levels of condensation may build up.
Plastic ducting condensation traps are manufactured from flame retardant polymer. Supplied with a 20mm overflow flow drain. PLEASE NOTE Condensation traps are not designed to fit directly to flexible ventilation ducting. Please use in conjunction with male couplers, duct tape and clips to ensure a proper tight fit. 4/100mm Dia Gravity Shutter for Extractor fan & Ducting.
The MV Plastic Shutter is ideal for mounting on an external wall to provide antil back draft when an extractor fan is switched off. The pastic shutter is suitable for internal and external mounting. Lightweight blades for reduced airflow restriction. Easy screw fixing and connection to ducting.
The plastic shutter blades are easily removed for fitting & cleaning. 4/100mm Dia Plastic Cowled Grille with Shutter.
Duct Cowling Grille is ideal for mounting on an external wall that is in an exposed position and where an outlet will be open to bad weather. The cowled grille has two advantages; it stops wind from rattling the shutter and also stops back draft when an extractor fan is switched off. Duct Cowling Grille is ideal for wind and rain protection.Single blade damper for anti-back draught. Duct cowling and blade are easily removed for fitting & cleaning. 4/100mm Dia Plastic-Fixed Blade Grille. MV Fixed Blade Grilles are ideal for mounting on an external wall or ceiling for a neat finish. Suitable for internal and external mounting. Can be mounted on the wall or ceiling. Inner part of grille is easily removed for fitting & cleaing. 4/100mm Dia Air intake/Extract Grille- Air Valve Grille. Air Valves are an excellent way of terminating you ducting to an asthetically pleasing grille.
Adjustable, easy to fit and looks great on any ceiling. Especially designed for the extract/input of air from ducted ventilation systems. Ideal for bathrooms, toilets, showers & offices. Made from clean gloss white, wipe clean plastic. Adjustable middle cone for complete control of airflow.Mating flange for securing a tight fit to ceiling or wall. 100mm, 125mm, 150mm & 200mm models available that fit standard ducting sizes. 4/100mm Dia Plastic Wall Sleeve. Plastic Ducting Wall Sleeves are designed to be mounted to provide a smooth transition through awall or aperture. The sleeve comes in two parts allowing it to fit into a wall thickness of between 300mm & 500mm. Plastic ducting wall sleeves are manufactured from flame retardant polymer. Lightweight with simple to fit connections to duct fittings, extractor fans and air terminal devices. Available in 350mm, 500mm, 1m, 1.5m. 1.5 m ducting will come as (1m + 500mm + coupler).
4/100mm Dia Plastic Round Solid Ducting. Plastic Solid Ducting is robust, versatile and easy to cut; making it the best solution for your ventilation system. The smooth surface of the ducting makes it a better option than flexible duct, as it causes less airflow resistance.Thus having a less dramatic effect on your fans performance. Lightweight with simple to fit connections for duct fittings, extractor fans and air terminal devices. Plastic solid ducting is available in precut lengths: 350mm, 500mm, 1000mm & 1500mm. These can be answered at a quicker rate than telephone calls so our staff are used more efficiently. How long will it take to arrive?
All orders are dispatched within 24 hours (MONDAY TO FRIDAY). Q:How will I know it has been sent? We are always willing to work things out.
DEFECTIVE ITEM / DAMAGED ITEM. An item that was discovered to be defective can be replaced with the same model only. Return will not be processed if any of these conditions are not met. The item "Plastic 4 inch 100mm Round Ducting Pipe Ventilation Extractor Fan Hydroponics" is in sale since Thursday, May 25, 2017. This item is in the category "Home, Furniture & DIY\Heating, Cooling & Air\Indoor Air Quality & Fans\Extractor Fans".
The seller is "the-ventilation-hub" and is located in LEICESTER. This item can be shipped to United Kingdom.