Extractor Ventilation Fan

Plastic 6 inch 150mm Round Ducting Pipe Ventilation Extractor Fan Hydroponics

Plastic 6 inch 150mm Round Ducting Pipe Ventilation Extractor Fan Hydroponics

Plastic 6 inch 150mm Round Ducting Pipe Ventilation Extractor Fan Hydroponics    Plastic 6 inch 150mm Round Ducting Pipe Ventilation Extractor Fan Hydroponics

6 (150mm dia) PLASTIC DUCTING & FITTINGS. Everything you need for your Ventilation Project. First you must select the item and quantity you want.

On the next screen you select. Instead of'Proceed to Checkout. Stainless Steel Worm Drive Clips/Jubilee Clips. 6/150mm Dia Worm Drive Clips. Worm Drive Jubilee Clips have been specifically designed for fixing flexible ducting to solid ducting, extractor fan spigots, duct fittings and air terminal devices.

9mm continuously threaded stainless steel band. The unique one-piece locking mechanism with tilting head provides very fast clamping by hand - only final tightening by screw or hex. Head driver is necessary to complete a perfectly airtight joint.

Plastic Ventilation Ducting Clips are used for fitting plastic solid ducting to a wall or ceiling. They are robust, versatile and easy to fit. Ventilation ducting brackets are manufactured from flame retardant polymer. Plastic Duct Clips are lightweight with simple to fit. Also available in other sizes (see my other listings).

6/150mm Dia Fan Anti Vibration Clamp. Fast Clamps are perfect for connecting fans, carbon filters, silencer and solid ducting.

The metal band has a foam lining so reduces fan vibration. Pull out eyelets for easy hanging. The best choice for connecting fans to carbon filters, silencers or solid ducting. Plastic Ducting Male Coupler is designed to join solid plastic ducting, un-insulated flexible ducting or insulated flexible ducting. Use either worm drive clips, aluminium or classic tape to ensure an air tight fit.

Manufactured from flame retardant polymer. Lightweight with simple to fit connections. 6/150mm Dia Back Draught Shutter. Plastic Ducting Back Draught Shutters are designed to provide anti back draught, and fit in between Solid Plastic Ducting, Flexible Ducting. Use either Worm Drive Clips, Aluminium or Classic Tape to ensure an air tight fit.

6/150mm Dia T Ducting Piece. Plastic Ducting T Pieces are designed to split Solid Plastic Ducting, FX un-insulated flexible ducting or FI insulated flexible ducting. Plastic ducting tee's are manufactured from flame retardant polymer. 6/150mm Dia Plastic Y Ducting Piece. Ducting Splitters are designed to split Solid Plastic Ducting, FX or FI Flexible Ducting. Use either QRC Worm Drive Clips, ADT Aluminium or CDT Classic Tape to ensure an air tight fit. Plastic ducting reducers are manufactured from flame retardant polymer. 6/150mm Dia Flexible Aluminium Ducting. Flexible ventilation ducting is very flexible, hard-wearing, multi-ply aluminium foil. 30 to 140 Deg C operating temperature range. Available in 5m & 10m lengths.

Manufactured to EU standard: EN13180. Fire resistant to BS 476. This is an important Building Regulation requirement as it reduces the risk of fire spreading through the duct to different rooms. 6/150mm Dia Acoustic Flexible Ducting.

Insulated ventilation ducting is very flexible, hard-wearing, multi-ply aluminium foil, puncture resistant inner core. Clear vapour seal layer to protect acoustic insulation from moisture and condensation. 25mm high density fiberglass insulation. Acoustic ducting is very flexible making it ideal for retrofit heat recovery installations.

Tough, scuff resistant, aluminium outer blanket. Our unique Combi Ducting is designed specifically for Hydroponic & Indoor Grow Room Set ups. Durable light retaining black outer layer.

Will not set on fire under extreme temperatures i. 6/150mm Dia 90 Degree Plastic Bend. Plastic Ducting Bends are robust, versatile and easy to fit to Solid Plastic Ducting, Flexible Ducting, giving you the ability to make a tight radius, 90 degree bend.

Plastic ducting bends are manufactured from flame retardant polymer. Plastic Ducting Reducers are robust, versatile and easy to fit to PD solid plastic ducting, FI Insulated or FX un-insulated flexible ducting.

The large end of the reducer (female) is designed to fit over PD solid plastic ducting, fan spigots and duct fittings with the smaller end of the reducer (male) designed to fit inside PD solid plastic ducting and FX & FI flexible ducting. If fitting the small end of the reducer to fan spigots or duct fittings, you will need a small piece of duct to enable a clean fit. Plastic Wall Plate with Spigots. 6/150mm Dia Plastic Wall Plate with Spigots.

Ventilation Ducting Wall Plates with Spigots are designed to fit into a wall, ceiling or panel to allow ducting to be connected either side. The plates are robust, versatile and easy to fit to PD Solid Plastic Ducting, FX or FI Flexible Ducting.

Ventilation ducting wall plates are manufactured from flame retardant polymer. The adhesive is aggressive and pressure sensitive, leaving an airtight non stretch seal. 45mm wide x 45m per roll.

CDT Classic Duct Tape is manufactured from PVC coated cloth. The adhesive is aggressive and pressure sensitive leaving an airtight non stretch seal. 6/150mm Dia Plastic Condensation Trap. Condensation Trap is designed to be fitted in-line to any heat recovery system to help reduce or eliminate condensation in bathrooms, shower rooms, kitchens, and utility rooms or anywhere that has high levels of condensation may build up. Plastic ducting condensation traps are manufactured from flame retardant polymer.

Supplied with a 20mm overflow flow drain. PLEASE NOTE Condensation traps are not designed to fit directly to flexible ventilation ducting. Please use in conjunction with male couplers, duct tape and clips to ensure a proper tight fit. 6/150 Dia Plastic-Fixed Blade Grille. MV Fixed Blade Grilles are ideal for mounting on an external wall or ceiling for a neat finish.

Suitable for internal and external mounting. Can be mounted on the wall or ceiling. Easy screw fixing and connection to ducting.

Inner part of grille is easily removed for fitting & cleaing. 6/150mm Dia Air intake/Extract Grille- Air Valve Grille.

Our Air-Smart Ceiling Air Valve as revolutionary product it is energy efficient, easy to fit and aesthetically pleasing. The Air-Smart ceiling grille is a breakthrough in design with unique features. It has extremely low pressure drops giving you more air from your in line extractor fan or heat recovery unit. The design allows for single person fitting from room size only in just a few easy steps.

Our Air-Smart ceiling grille is made of 100% ABS so there is zero chance of corrosion or build-up of condensation. Fully ABS with no corrosive parts. A brilliant white, wipe clean plastic gloss finish.

Adjustable middle cone for complete control of airflow. Easy fit mounting, can be fitted from room side without the need to get void or left access. Mating flange for securing a tight fit to your ceiling.

Locking nut provided for easy commissioning. 6/150mm Dia Plastic Wall Sleeve.

Plastic Ducting Wall Sleeves are designed to be mounted to provide a smooth transition through awall or aperture. The sleeve comes in two parts allowing it to fit into a wall thickness of between 300mm & 500mm. Plastic ducting wall sleeves are manufactured from flame retardant polymer. Lightweight with simple to fit connections to duct fittings, extractor fan. These can be answered at a quicker rate than telephone calls so our staff are used more efficiently. How long will it take to arrive? All orders are dispatched within 24 hours (MONDAY TO FRIDAY). How will I know it has been sent? We are always willing to work things out. DEFECTIVE ITEM / DAMAGED ITEM. An item that was discovered to be defective can be replaced with the same model only. Return will not be processed if any of these conditions are not met. The item "Plastic 6 inch 150mm Round Ducting Pipe Ventilation Extractor Fan Hydroponics" is in sale since Thursday, May 25, 2017.

This item is in the category "Home, Furniture & DIY\Heating, Cooling & Air\Indoor Air Quality & Fans\Extractor Fans". The seller is "the-ventilation-hub" and is located in LEICESTER. This item can be shipped to United Kingdom.

  • Brand: FANTRONIX
  • MPN: DUCTING


Plastic 6 inch 150mm Round Ducting Pipe Ventilation Extractor Fan Hydroponics    Plastic 6 inch 150mm Round Ducting Pipe Ventilation Extractor Fan Hydroponics