Head driver is necessary to complete a perfectly airtight joint. 60mm minimum diameter to 135mm.Also available in other sizes (see my other listings). Plastic Ventilation Ducting Clips are used for fitting plastic solid ducting to a wall or ceiling. They are robust, versatile and easy to fit. Ventilation ducting brackets are manufactured from flame retardant polymer. Plastic Duct Clips are lightweight with simple to fit.
4/100mm Dia Fan Anti Vibration Clamp. Fast Clamps are perfect for connecting fans, carbon filters, silencer and solid ducting. The metal band has a foam lining so reduces fan vibration. Pull out eyelets for easy hanging. The best choice for connecting fans to carbon filters, silencers or solid ducting.
Plastic Ducting Male Coupler is designed to join solid plastic ducting, un-insulated flexible ducting or insulated flexible ducting. Use either worm drive clips, aluminium or classic tape to ensure an air tight fit. Manufactured from flame retardant polymer. Lightweight with simple to fit connections. 4/100mm Dia Back Draught Shutter.Plastic Ducting Back Draught Shutters are designed to provide anti back draught, and fit in between Solid Plastic Ducting, Flexible Ducting. Use either Worm Drive Clips, Aluminium or Classic Tape to ensure an air tight fit. 4/100mm Dia T Ducting Piece.
Plastic Ducting T Pieces are designed to split Solid Plastic Ducting, FX un-insulated flexible ducting or FI insulated flexible ducting. Plastic ducting tee's are manufactured from flame retardant polymer.
4/100mm Dia Plastic Y Ducting Piece. Ducting Splitters are designed to split Solid Plastic Ducting, FX or FI Flexible Ducting. Use either QRC Worm Drive Clips, ADT Aluminium or CDT Classic Tape to ensure an air tight fit. Plastic ducting reducers are manufactured from flame retardant polymer. Flexible PVC Hose provides a solution to overcome awkward situations where a rigid system can not be installed.
Suitable for commercial and domestic use. Complies with Part F building regulations. Compressed length of hose 0.3m.
Available in 1m , 3m & 6m lengths. PVC hose is reinforced with spirally wound steel wire and is ideal for 4inch extractor fans as well as tumble dryers etc. 4/100mm Dia Flexible Aluminium Ducting. Flexible ventilation ducting is very flexible, hard-wearing, multi-ply aluminium foil.
30 to 140 Deg C operating temperature range. Available in 5m & 10m lengths. Manufactured to EU standard: EN13180.Fire resistant to BS 476. This is an important Building Regulation requirement as it reduces the risk of fire spreading through the duct to different rooms. 4/5m Long Acoustic Flexible Ducting. 4/100mm Dia Acoustic Flexible Ducting. Insulated ventilation ducting is very flexible, hard-wearing, multi-ply aluminium foil, puncture resistant inner core. Clear vapour seal layer to protect acoustic insulation from moisture and condensation. 25mm high density fiberglass insulation. Acoustic ducting is very flexible making it ideal for retrofit heat recovery installations. Tough, scuff resistant, aluminium outer blanket. 4/2.5m Long Acoustic Flexible Ducting. Our unique Combi Ducting is designed specifically for Hydroponic & Indoor Grow Room Set ups.
Durable light retaining black outer layer. Will not set on fire under extreme temperatures i. 4/100mm Dia 45 Degree Plastic Bend.
Plastic Bends are robust, versatile and easy to fit to Solid Plastic Ducting, or Flexible Ducting, giving you the ability to make a tight radius, 45 degree bend. 4/100mm Dia 90 Degree Plastic Bend. Plastic Ducting Bends are robust, versatile and easy to fit to Solid Plastic Ducting, Flexible Ducting, giving you the ability to make a tight radius, 90 degree bend. Plastic ducting bends are manufactured from flame retardant polymer. 4/100mm Dia Plastic Ducting Reducer.
Plastic Ducting Reducers are robust, versatile and easy to fit to solid plastic ducting, FI Insulated or FX un-insulated flexible ducting. The large end of the reducer (female) is designed to fit over PD solid plastic ducting, fan spigots and duct fittings with the smaller end of the reducer (male) designed to fit inside PD solid plastic ducting and FX & FI flexible ducting.
If fitting the small end of the reducer to fan spigots or duct fittings, you will need a small piece of duct to enable a clean fit. Plastic Ducting Reducers are robust, versatile and easy to fit to PD solid plastic ducting, FI Insulated or FX un-insulated flexible ducting. Plastic Wall Plate with Spigots. 4/100mm Dia Plastic Wall Plate with Spigots.Ventilation Ducting Wall Plates with Spigots are designed to fit into a wall, ceiling or panel to allow ducting to be connected either side. The plates are robust, versatile and easy to fit to PD Solid Plastic Ducting, FX or FI Flexible Ducting. Ventilation ducting wall plates are manufactured from flame retardant polymer. Aluminium Duct Tape is manufactured from aluminium coated tape. The adhesive is aggressive and pressure sensitive, leaving an airtight non stretch seal. 45mm wide x 45m per roll. CDT Classic Duct Tape is manufactured from PVC coated cloth. The item "Plastic Ducting Tubing Flexible Pipe Extractor Fan Ventilation Bend T Y Grill 4" is in sale since Tuesday, May 23, 2017. This item is in the category "Home, Furniture & DIY\Heating, Cooling & Air\Indoor Air Quality & Fans\Extractor Fans". The seller is "hydroponicfans" and is located in Hinckley.
This item can be shipped to United Kingdom.