Klarstein Zelda Extractor Hood Stainless Steel Ventilator 60cm Wall Mounting 620 m³/h Touch Timer. Maximum air extraction rate up to 620 m³/h. Adjustable 5 minute timer and LED lights (2 x 1.5 Watt) which can be turned off and on. Stainless steel housing and a flue duct as well as a black safety glass panel. Black safety glass panel on the front and a touch-sensitive control panel.
Grease filters made of aluminum, dishwasher safe. Lowest operating noise - 74 dB at highest setting. Mounting kit with wall brackets, dowels, and screws. Power supply: AC 220-240V, 50/60 Hz.
60 x 31 x 50 cm (WxHxD not including flue duct). 67.5 - 105 cm (including flue duct). Diameter of the exhaust hose: 150 mm & 153 mm (ø). Length of power cable: approx. 1 x mounting kit (wall bracket, dowels, screws).Instruction manual in German (other languages: English, French, Italian, Spanish). Ergonomic extractor hood with an energy efficiency class B, three performance levels, an adjustable 5 minute timer, and an air extraction rate of 620 m³/h.
Ideal for small to medium sized kitchens. The Klarstein Zelda extractor hood provides small to medium kitchens a way to remove unwanted vapors and keep the olfactory quality of your kitchen at its highest. There are three different performance settings.
The highest setting carries up to 620 m³ of exhaust air per hour, so you can tackle without any nasal stress the preparation of your next eight course meal. Both the loudness and the power consumption during operation stay within limits. The Zelda is a wall mounted hood that fits elegantly with its ergonomic design in any kitchen space. With a width of 60 cm, it is also suitable for narrow kitchens.
Via the touch-sensitive control panel, you can control the ventilation, the lighting, and the 5 minute Timer. To protect the inside of the extractor hood and the exhaust duct from contamination, Klarstein's Zelda has two replaceable and dishwasher safe, aluminum grease filters. The housing is made of brushed stainless steel and has no hidden or hard to reach corners, which makes it extremely easy to clean.The extractor hood should be mounted on the wall (not on the ceiling) above the cooking surface. The necessary materials for mounting are included. With its stainless steel visage, the extractor hood integrates beautifully into any modern kitchen design. For dim lighting conditions, there is LED lighting built into the Klarstein extractor hood. Model number: 10029387 Annual energy consumption: 64.9 kWh/year Time extention factor: 1.2 F luid dynamic efficiency: 23 Energy efficiency index: 66.5 Highest measured air flow volume: 342 m³/h Highest measured air pressure: 354.5 Pa Maximum air flow: 647.7 m³/h Highest measured electrical input power: 146.5 W Nominal output of lighting system: 3 W Average illuminance of the lighting system onto cooking surface: 58 lux Measured power consumption in standby mode: - W Measure power consumption in off mode: 0.41 W Sound power level: 74 dB. The item "Cooker Hoods Extractor Fan Kitchen Chimney 620m³/h 60cm Ventilation Touch timer" is in sale since Sunday, September 22, 2019.
This item is in the category "Home, Furniture & DIY\Appliances\Cookers, Ovens & Hobs\Oven & Cooker Hoods". The seller is "hifi-tower" and is located in Berlin.
This item can be shipped to United Kingdom.